Guide to Fitting BMX Cranks

Find out how to fit your BMX cranks by adhering to the straightforward steps outlined in our video:

1. Begin with applying grease to your crank's spindle and insert it into the bottom bracket.
2. Use a rubber mallet to secure it in position.
3. Place the bearing cover on and grease the part of the spindle that sticks out.
4. Proceed to check the gap between the crank and your frame. If necessary, include a spacer.
5. Further, slide on the crank and tighten it with a greased bolt.
6. Proceed by installing the other bearing cover.
7. Then, take the crank with the sprocket and ensure it aligns with the initial crank.
8. Once more, tighten everything with a greased bolt.

Your cranks are now fitted!